This guide is available in English only for now.
Size and placement
Tattoo size and placement guide: how big, and where
Updated 25 de setembro de 20267 min read
Save to PinterestSize is not only a matter of taste. Ink spreads slightly under the skin over the years, so lines thicken and tight gaps close. A design that is too detailed for its size slowly turns into a smudge. The same design a few centimetres larger stays readable.
The numbers here are rules of thumb for the planning stage. Your artist knows your skin and their own technique, and has the final say.
Quick answer
Make a tattoo big enough that neighbouring lines keep roughly 1.5 to 2 mm of open skin between them. Simple symbols work small. Lettering needs letters around 5 to 6 mm tall. Detailed realism and portraits need to be around palm sized, about 10 to 12 cm, or larger. Fingers, palms, feet and inner lips fade and blur faster than flat, low friction areas.
- Open skin between lines
- 1.5 to 2 mm or more
- Smallest readable letters
- 5 to 6 mm tall
- Portraits and realism
- 10 to 12 cm or larger
- Areas that fade faster
- Fingers, palms, feet, inner lips
Step by step
Choose the size and placement for a tattoo
What you need
- Your design, on screen or printed
- Plain paper
- Masking tape
Tools
- Measuring tape
- Ruler marked in millimetres
- Mirror
- Printer
- 01
Measure the space
Stand relaxed and measure the area you want to use, in centimetres. Stop short of creases, joints and the point where the surface curves away.
- 02
Find the tightest detail
Look for the place where two lines run closest together: eyes, petals, lettering, scales. That spot sets the minimum size for the whole design.
- 03
Scale until the gaps hold
Enlarge the design until that tightest gap is roughly 1.5 to 2 mm at print size. If the piece has to stay small, take lines out instead.
- 04
Match the shape to the body area
Put long designs on long areas and round designs on round ones. Line the main axis up with the limb or the spine.
- 05
Test it at true size
Print the design at 100%, cut it out and tape it in place. Look at it in a mirror, standing still and then moving.
Tip: The TattooStencil stencil maker prints a design at an exact width in centimetres, with a 50 mm calibration bar to confirm the scale.
- 06
Ask your artist to confirm
Show them the size and the placement. They may suggest going larger, simplifying, or moving it a few centimetres.
Why small detailed tattoos blur
A fresh tattoo is as sharp as it will ever be. Over the years the ink spreads slightly under the skin. Every line gets a little wider, and the open skin between lines gets a little narrower.
On a large, open design the change is hard to notice. On a small, dense one the gaps close and separate lines merge into one dark shape. So the rule is about spacing, not overall size: keep roughly 1.5 to 2 mm or more of open skin between neighbouring lines. The smaller the piece, the simpler it has to be.
Minimum tattoo size by style (cm)
These are practical minimums for a design to stay readable, not ideal sizes. Larger is safer for anything detailed. Palm sized means about 10 to 12 cm (4 to 5 inches).
| Style | Practical minimum | What limits it |
|---|---|---|
| Simple symbol or bold outline | About 5 cm wide | Few lines and open gaps, so it shrinks well. |
| Lettering | Letters 5 to 6 mm tall or more | The openings inside letters such as a and e close first. |
| Traditional flash | About 7 to 10 cm wide | Bold outlines need room between them. |
| Fine line floral or ornamental | About 8 to 10 cm wide | Thin lines hold only if the spacing is generous. |
| Portrait or realism | Palm sized, 10 to 12 cm, or larger | Eyes, nostrils and lips have to stay separate. |
Match the shape to the body area
A tattoo reads best when its outline echoes the area it sits on. Measure the flat face of the area, not the whole limb, and keep the design inside it.
Profiles and animals usually look best facing toward the front or the centre of the body. The mirror toggle in the stencil maker flips a design for exactly that.
- Forearm, calf and spine
- Long, vertical shapes. Keep the main axis in line with the limb.
- Upper arm, shoulder and thigh
- Round and shield shapes, and large single subjects such as portraits.
- Chest, sternum and upper back
- Wide or symmetrical designs, centred on the midline of the body.
- Wrist, ankle and behind the ear
- Small areas for simple designs with few lines.
- Elbows, knees and other joints
- Skin stretches as the joint bends, so circles and straight lines distort.
How placement affects ageing
Where a tattoo sits changes how fast it softens. High movement and high friction areas lose ink sooner: fingers, palms, feet and inner lips fade and blur faster. Sun exposure speeds fading on any area that is usually uncovered.
This does not rule those places out. It means fine detail there is a poor bet, and simple, bold designs last better. How your own skin heals and holds ink is a question for your artist.
Test the size before it is permanent
A paper test costs nothing. In the TattooStencil stencil maker, enter the width in centimetres, print the true-size PDF and tape it where the tattoo will go. Pick Fine for small detailed pieces and Bold for large ones.
In the free stencil library, each design lists its smallest good size in centimetres. Going below that number means removing detail, not just shrinking.
Common questions
How big should my tattoo be?
Big enough that its tightest details keep roughly 1.5 to 2 mm of open skin between lines. For a simple symbol that can be a few centimetres. For a portrait or detailed realism it means around palm sized, 10 to 12 cm, or larger.
What is the minimum size for a detailed tattoo?
As a rule of thumb, detailed realism and portraits need about 10 to 12 cm or more. Below that, features such as eyes and lips sit too close together and merge as the ink spreads. Your artist may set a higher minimum.
Will my fine line tattoo blur?
All tattoo lines soften and thicken slightly over the years. A fine line design with generous spacing stays readable for longer than one with tightly packed detail. Ask your artist how the design will age on you.
How small can tattoo lettering be?
Aim for letters around 5 to 6 mm tall or more. In smaller text, the openings inside letters such as a, e and o fill in and the word becomes hard to read.
Where do tattoos fade the fastest?
High movement and high friction areas fade faster: fingers, palms, feet and inner lips. Sun exposure also speeds fading on skin that is usually uncovered. Designs in those places last better when they are simple and bold.
Size and placement
Check a design before it is permanent
Rate My Tattoo scores an existing tattoo or a planned design on line clarity, how it will hold up over the years, contrast and body flow. Treat the score as a second opinion to take to your artist.
Keep reading
All guidesStencil making
How to make a tattoo stencil from a photo or drawing
Make a tattoo stencil from a photo or drawing: clean line art, the right line weight, exact size in cm, then print or hand trace onto transfer paper.
Stencil application
How to apply a tattoo stencil so it stays put
Apply a tattoo stencil step by step: shave and clean, a thin layer of primer, place it with the client standing, press, peel, then dry 10 to 15 minutes.
Transfer troubleshooting
Tattoo stencil not transferring: causes and fixes
Stencil too light, blurry, patchy or rubbing off? Match the symptom to its cause and fix it: skin prep, primer amount, pressure, paper and print darkness.